Product information "motogadget msp breakout box type A"
Type A
The signal cables for the control lamps of the motoscope pro are connected to the msp Breakout Box A. Convenient screw terminals make the connection work very easy. Small dimensions allow the numerous cables and the box to be hidden somewhere on the vehicle. Only one cable is required between the box and the motoscope pro for signal transmission (mo.bus). The breakout box is waterproof and insensitive to vibration.
The motoscope pro impresses with its ultra-flat housing design. 734 LEDs,
controlled by a 16bit Risc processor, form the almost fully self-illuminating
display matrix. It ensures optimal readability - even in direct sunlight.
Automatic brightness adjustment is a matter of course. An analog LED band with
drag pointer function displays the speed in a freely scalable manner. The main
and secondary display can be configured by the user. Another display area
shows the engaged gear. Four indicator lights are already integrated and can
be used for many more input signals with the help of the display. The Breakout
Box A or B is additionally required for the connection wiring of the indicator
lights and/or the measuring inputs.
The motoscope pro has a complete CAN bus interface and is therefore prepared
for many future future developments of Plug 'n Ride solutions.
The aluminum housing is milled from solid, anodized and can be easily mounted
by two threaded bushings on the back. The instrument has an ABE and does not
have to be registered.
Please order the breakout box for connecting indicator lights separately. For
BMW R9T no breakout box is needed.
Technical data:
Length/width/depth: 109 mm/ 47 mm/ 11 mm
Weight with cable: approx. 100 g
Mounting: 2 x M3 threaded bush
Current consumption in operation: approx. 200 mA (load-dependent)
Current consumption in idle state: 0.4 mA
Operating voltage: 9 V - 15 V
Operating temperature: -20°... +80°C
Tachometer (LED band): 0 - 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
Speedometer: 0 - 350 km/h o. mph
Trip meter A: up to 999.9 km or mi
Total kilometers (adjustable): up to 250000 km or mi
Operating hours counter/service: 0 - 9999.5 h
Clock: 23:59 h/min
Travel time display: 0 - 99:59:59 h/min/s
Tachometer (on LCD): 0 - 20000 rpm
adjustable speed warning (shift flash): 0 - 20000 rpm
On-board voltage indicator: 9 - 18 V
Undervoltage warning: Warning when below approx. 11V
Time measurement: 0 - 100 km/h o. 0 - 60 mph 0.00 - 30.59 sec.
instantaneous acceleration: +/- 0.00 - 1.50 G
Average speed: 0 - 350 km/h o. mph
Maximum speed: 0 - 350 km/h o. mph
Maximum speed: 0 - 20000 rpm
max. positive acceleration: +1.50 G
max. negative acceleration: - 1.50 G
Gear indicator N, gear 1 - 6
green control LED (with breakout box A/B): idle (N)
green control LED (with breakout box A/B): turn signal left, right
blue control LED (with breakout box A/B): high beam
red warning LED (with breakout box A/B): various warning functions
Gasoline/reserve (with breakout box A/B): 0 - 100% with low warning
Air temperature* (with breakout box B): -20/ - 80 °C / -4 - 176 °F with
High-/Low-warning
Water temperature* (with breakout box B): 40 - 120 °C / 104 - 248 °F with
high/low warning
Oil temperature* (with breakout box B): 40 - 150 °C / 104 - 302 °F with
High-/Low warning
Oil pressure* (with breakout box B): 0.5 - 8 bar / 0 - 116 psi with high/low
warning
Scope of delivery:
Instrument with approx. 75 cm connection cable
Mini pushbutton
flying fuses
6 Cable end connectors
Speedometer sensor (M5 x 0.5 fine thread, stainless steel, IP 68) with 150
cm connection cable
2 strong neodymium mini magnets
2 M3 mounting screws with washer
QR code for mounting and operating instructions
Please note that temperature and pressure sensors must be ordered separately.