We manufacture spoke rims for almost all motorcycles - we have made a picture selection of our already made spoke rims here, which you are welcome to use for orientation. The matching wheel hubs for the rims are manufactured according to the dimensions of your original cast wheels and can thus be installed plug & play without any further modifications in the vehicle (screw on brake discs, mount tires and install). The tires are always mounted in conjunction with inner tubes. We can offer you the original sizes (as with your cast rims) or even (if there is enough space in the swingarm and chain) wider rims. Aluminum rims go up to max. 5.5", stainless steel rims up to 10.0". Information about the choice of wheel hubs: First, decide whether you need a front or rear hub in the variant selection (depending on where the rim will be installed). If you already have suitable wheel hubs, please select "supplied by customer" and send us the wheel hub safely packed by mail (RF-Biketech GmbH, Mühlweg 10, 97702 Nüdlingen, Germany). Here, we will then spoke the selected rim ring. If you do not have a suitable wheel hub, we will manufacture it ourselves. For the front wheel hubs, please measure the inner diameter of your brake discs. If this is max. 75 mm, please select "diameter up to 150 mm", if more than 75 mm, please select "over 150 mm diameter". In the case of a rear wheel hub, generally select "diameter more than 150 mm", unless the wheels are for a single-sided swingarm with central nut mount, in which case select "diameter up to 150 mm". The wheel hubs are made of high-strength aluminum. Of course, we try to make them as light as possible. Standard are 40 spoke holes, but 60 spokes are also possible. The wheel hubs are delivered including mounted wheel bearings (C3 including dust cover). TÜV information: (only Germany) TÜV reports are specific to your vehicle for the aluminum spoke rims, and strength reports as well as certificates are included for the stainless steel spoke rims. Surface treatment information: The surface of the spokes always remains polished stainless steel, but you can configure the surface of the rims and wheel hubs in the variant selection - in addition to the classics "high gloss polished" and "black matt or black gloss powder coated", it is also possible to select the surface in any RAL color (gloss or matt). For this purpose, please specify the RAL color in the comment field in the checkout (when completing the order) or simply inform us by mail (with your order number). For even more individual requests: Special custom designs are of course also possible with us - so if you have even more specific requests, just send us an email or give us a call. We will be happy to advise you and provide you with an offer in the shortest possible time.

We widen the original cast wheels of your motorcycle! The advantage is that you can then drive wider or even changed in diameter wheels / tires without having to make further changes to the bike. The wheel hubs remain unchanged, only the rim beds are changed. Of course you have to take into account the clearance wheel-chain, wheel-cardan, wheel-belt and the width of the swingarm. In most cases, the original rim widening for motorcycles is also the most cost-efficient way to realize wheel size changes. For widening, the original rim beds are turned on special lathes and then machine-welded to corresponding larger rim beds using the TIG welding process. The weld is no longer visible in the outer area of the rim beds and the rim looks like a "normal" rim. A strength certificate with identification is enclosed. Note: If you are unsure whether your rim can be widened, send us a picture by mail in advance! We will be happy to advise you. Here's why: Cast rims, which have a rim bed, into which no cast spokes run from the inner star, can generally be widened (that's most rims). However, there are also rims where the cast spokes merge into the rim bed. Here, it is usually difficult or even impossible to widen the wheel. Furthermore, the following applies: A rim can be widened by a maximum of 2.0" in the same diameter, e.g. 3.5" x 17" to a maximum of 5.5" x 17". Wider is also possible, but then the diameter of the rim must be increased by 1", e.g. 5.5" x 17" to 10.0" x 18". The wheels are blasted before processing and must be resurfaced after widening, which we of course also offer - just select the desired variant (coated, painted, polished). Our variants here in the store are always based on delivered 17" or 18" wheels. Other dimensions on request by mail. Please send or deliver wheels without attachments (brake discs, tires, sprocket carrier) by mail to us. The procedure: Place your order here in the store or send us an e-mail request Send the bike to us by mail (print out the order confirmation and put it in the package) to the address RF-Biketech GmbH, Mühlweg 10, 97720 Nüdlingen, Germany We widen the wheel as desired and treat the surface depending on the variant We send the widened wheel back to you Scope of delivery: Widened wheel (wheel bearings are not mounted but attached in the package) technical report with identification (Festigkeitsgutachten) for TÜV (Germany)

We have designed this single swingarm especially for the Ducati Scrambler 800. In principle, the swingarm is manufactured in the same design as our universal single-sided swingarm (also available here in the store). However, we offer this swingarm as an individual item due to the elaborate strut/shock absorber mount specifically for the 800 Scrambler. The swingarm is available for wide tires from 240 to 360. We manufacture the swing arm exclusively according to the selected tire width - installation is plug & play. Nothing needs to be changed on the vehicle itself: Original swingarm out, RFB swingarm in, done. The integrated, tensionable pinion shaft compensates for chain misalignment due to the wide tire. At the end, the rear wheel is absolutely central to the vehicle axle (no offset). We offer the swingarm with various surfaces such as raw aluminum, high-gloss polished, black, etc. TÜV-Info (for Germany): We supply various documents such as technical drawing, material specification, TÜV sample report of an identical vehicle (if available) for individual TÜV approval (TÜV-Einzelabnahme). If there are any problems with the individual TÜV entry, we guarantee the TÜV entry in our workshop. Scope of delivery: Aluminum single swing arm, ready for installation incl. wheel bearings (swing arm is approx. 25-50 mm longer than original swing arm because of integrated pinion shaft) incl. mounted shock absorber holder pre-assembled pinion shaft and wheel stub axle and swing arm bearings cover pinion shaft chain sprocket with adapter fit for the motorcycle Trigger plate for ABS and holder for ABS sensor (only with variant "with ABS") Chain guard RFB TÜV-documents (for Germany): see info above

We have developed this GRP rear section especially for the Ducati Scrambler 800. The rear frame has to be shortened, then a bracket is screwed in, which is then used to mount the rear section. LED indicators, brake and rear lights are integrated into the rear section. After the conversion, the vehicle is a single-seater. We also recommend adding a side license plate. ATTENTION: The vehicle must be brought to our workshop for this. We offer a pick-up and delivery service for Germany only, so if you are living in another country, you have to take care of the pickup and delivery yourself – we unfortunately can not offer the service ourselves at this time. Cost of installation in our workshop: 249 Euro. Scope of delivery: GRP tailpiece, unpainted integrated blinkers integrated brake and rear light Seat black Mounting material TÜV documents

We have developed this special triple clamp set for the Ducati Scrambler 800 in order to integrate the original speedometer. The brackets for the original headlight are also already provided. The triple clamp set is wider than the original to achieve the corresponding "fat" look. For this reason, a longer wheel axle and a brake disk spacer must also be fitted. As the triple clamp set does not have a handlebar mount, it can only be fitted in conjunction with handlebar stubs (available here in the store), which are fitted under the upper triple clamp. The clamp diameter for the stubs is 51 mm. Scope of delivery: Ready-to-install triple clamp set Front wheel axle VA with wheel spacer Brake disk spacer with screws TÜV certificate