CNC-milled footrest system from our own company for Kawasaki Z 650/750, Kawasaki Z 900/1000/Z1R/MK2 and Kawasaki Z 1000 ST models. The foot rest system is made of high-strength aluminum and is plug & play mountable. The system is set back approx. 30 mm. The original brake cylinder of the old Z models no longer fits - we use a brake cylinder from newer Kawasaki models, e.g. ZX6R, ZRX7R, ZRX9R from 1995 to 2003. The system also fits all Z 1 / Z 900 models, but these must then be converted to rear disc brakes (original drum brakes). Scope of delivery: Pre-assembled footrest system right and left Shift rod with mounting for shift shaft Brake light switch as banjo bolt 4x M10 x 1.25 retaining bolts with spacers TÜV documents: material specifiction, sample report of identical vehicle for TÜV-Einzelabnahme. (for Germany) If there are problems with the TÜV-entry, we guarantee it at our workshop.

Contactless, high quality ignition system from Dyna. Installation can be done very easily (within 30 min). Can be operated either with the original ignition coils or better with the Dyna ignition coils (also available here in the store). Advantages: No more annoying adjustment of the breaker contacts, exact ignition timing, better combustion, absolutely maintenance free. Scope of delivery: Dyna S ignition system complete Connection material

End cap made from aluminum for Marving Race muffler. Fits on all mufflers with 70 mm diameter. The end cap is mounted with the original muffler. (M6 nut has to be grinded out) Scope of delivery: Aluminum end cap incl. mounting screw

Set of valve stem seals from VITON (OEM quality) - 8 pieces are required per cylinder head. The packaging unit therefore contains 8 pieces. Fits Z models Z 1, Z 900, Z 1000 A, Z 1000 MK2, Z 1000 ST and Z 1 R. Scope of delivery: Valve stem seals, 8 pieces

Chrome cylinder head cap nut in the original design. Scope of delivery: Cap nut, steel chromed

Engine oil seal set for old Z models Z 1 900, Z 900, Z 1000 A, Z 1000 MK2, Z 1000 ST, Z 1 R, Z 1000 J/R/GPZ. All engine oil seals are included in the sets, not the valve stem seals. Scope of delivery: Engine oil seals, 8 pieces

Original Kawasaki spare part Scope of delivery: 1x special nut

Nut for frame axle for all old Z models from Z 650, Z 1 900, Z 900, Z 1000A, Z 1000 MK2, Z 1000 ST, Z 1000 J/R/GPZ and Z 1 R. Scope of delivery: Nut M 16 x 1.5, 1 piece

We offer this set of seat bench hinges as a replica part for all old Z models. Scope of delivery: Seat bench hinges, black powdercoated, 2 pieces Mounting screws 2x bolts with split pin

Galvanized exhaust studs M6 (Z650, Z900 models) or M8 (Z1000 models). Scope of delivery: Stud bolt, 1 piece, size depending on variant

Can be used universally for steel tanks. Diameter of tank cap with outer ring 94 mm. The tank cap can be locked with the key. Weld-in holder is made of steel. Scope of delivery: Fuel cap with outer ring Key and screws Steel weld-in holder

Rear and front tank rubbers (depending on variant) for old Z-models. Original Kawasaki spare part. Scope of delivery: Tank rubber, rear or front depending on variant, 1 piece

Half moon valve covers in OEM quality depending on variant for Z 1 900, Z 900, Z 1000 A, Z 1000 MK2, Z 1000 ST, Z 1 R, Z 1000 J/R/GPZ. Set price (4 pieces). We are aware that there are also slightly cheaper ones on the market, but we do not offer these as they often push out. Scope of delivery: Set of half moon valve covers (4 pieces)

K&N single air filters (set of 4), suitable for all Mikuni RS 34 and Mikuni RS 36 carburetors and for Z 1000/J/R carburetors. Highly recommended with Mikuni flat slide carburetor conversions. Info TÜV: TÜV-Einzelabnahme required! (In Germany) The TÜV entry is also possible in our house. Scope of delivery: K&N single air filter (4 pieces) VA Clamps

Original spare part from Kawasaki, is screwed into the cylinder bank. Scope of delivery: Cam chain guide, 1 piece

Aluminum exhaust pipe holders/crowns for all old Z and GPZ models. We also offer fitting exhaust pipe collars for each exhaust system (also in the store). Attention: Price for one piece (not 4 pieces as seen in the picture). Scope of delivery: Exhaust pipe holder, aluminum, 1 piece

Original spare part from Kawasaki, Cam chain tensioner-assy with rubber wheel for Z 1 900, Z 900 A4, Z 1000 A1 und A2, Z 1000 MK2, Z 1 R and Z 1000 ST. Scope of delivery: Cam chain tensioner-assy with rubber wheel, 1 piece

Cranked chain sprocket for our wide wheel conversion to 180/190 tires for Z 1 900, Z 900 A4, Z 1000 A1 and A2, Z 1 R and Z 1000 MK2 engines. In most cases, an 14 mm adapter ring has to be added below the chain sprocket at the rear wheel. Note: Sprocket for 530 chain. Chain sprocket 530, 16/17/18 teeth (choose variant above), 14 mm cranked

Colored Dyna silicone ignition wires with graphite shielding. Fits with our Dyna ignition coils. Can be shortened to any required length. Sufficient for almost all four cylinder models. Scope of delivery: Set of two 120 cm long cables with 4 spark plug connectors 7 mm cable cross section Mounting material

Mikuni RS 36 carburetor for Zephyr 1100 or for Z 900, Z 1000, Z 1000 MK2, Z1R, GPZ 1100 B1, GPZ 1100 B2 and GPZ 1100 UT – please choose your vehicle in the variants above! This carburetor can be installed in conjunction with the original air filter box and the original intake rubbers, only the original throttle cable must be slightly modified. This RS 34 Mikuni flat slide carburetor can be installed in conjunction with the original air filter box and the original intake rubbers, only the original throttle cable must be slightly modified. You can expect more power and higher torque due to the optimal tunability. For this purpose, the K&N exchange filter is highly recommended. The RS carburetor kits from Mikuni are available for a variety of different motorcycles. These carburetors have proven themselves very well over the years, both on racing and street bikes. The advantages of these carburetors over stock carburetors are more spontaneous throttle response and higher power output. The more spontaneous throttle response results from the throttle slide being actuated directly by the throttle cable, in contrast to the constant-pressure carburetors, which are fitted exclusively as original equipment, where the throttle slide is lifted by a membrane with a delay. The higher power output is due on the one hand to the larger cross-section and on the other to the very good flow conditions in the RS carburetor. Important components such as the main jet, needle jet and jet needle can be replaced or modified in just a few minutes without having to remove the carburetor. The infinitely adjustable accelerator pump allows individual adjustment for different driving styles. Scope of delivery Complete carburetor Mikuni RS 36, ready for installation

Original side cover rubber as a replica part for Z 1 900, Z 900 A4, Z 1000 A1 and A2, Z 1 R, Z 1000 MK2 and Z 1000 ST. Three rubbers are required for one side cover. Scope of delivery: Side cover rubber, 1 piece

Fully electronic cockpit in retro style suitable for all motorcycles, milled from the full aluminum. Speedometer and tachometer are electronically controlled. Day/total mileage indicator, turn signal, neutral, high beam, oil. Includes ignition switch. Fits old Z models (1972 to 1978) without further adjustment work on the triple clamp. Wiring must of course still be done. For all other motorcycles adapter plates can be manufactured - if interested just contact us. Speedometer and tachometer are illuminated in blue. Control lights are indicated by LEDs. Scope of delivery: Completely assembled retro cockpit incl. speedometer sensor Cable kit Universal ignition lock (plug fits old Z models plug & play) TÜV-certificate

These Dyna ignition coils are suitable for original ignition systems and all Dyna ignition systems. The small size makes them ideal for custombikes. They generate an ignition voltage of 40,000 V. Matching ignition cables available here in the store. Supplied as a set with 2 outputs each. Scope of delivery: Dyna ignition coils 3 ohms with double output (2 pieces) Connector plugs

Set of intake rubbers for RS 34 and RS 36 Mikuni flat slide carburetors, suitable for all Z models from Z 1 900 to GPZ 1100. Scope of delivery: Set of intake rubbers, 4 pieces