This tail piece / rear section is longer than the original rear section and should only be fitted in conjunction with the chrome fender available here in the store (if fitted without the chrome mudguard, a holder for the license plate must be made yourself). The tailpiece can be fitted without any modifications to the vehicle itself. It is supplied unpainted. The original colors for painting are available from RH-Lacke www.motorradlack.de. We are the official importer of DOREMI-Japan, who manufacture this part Scope of delivery: Tail piece Z 1 Style, unpainted

Our chain guard made from stainless steel fits for all Z 900 RS models and can be installed with very little effort – the original rear wheel cover has to be removed before the installation. Scope of delivery: Chain guard stainless steel (polished or black powdercoated)

High-tech CNC levers in long or short version. Fully milled of 6061-T6 aluminium. Extremely light and resistant. Weight without adaptor: short 56g, long 64g. Length: Short 14,5cm, long 17,5cm. 6-fold adjustable (even while driving). Delivery includes two levers (brake and clutch lever). Ready to mount, adaptors included. With German homologation - (KBA-No. 91663) - Quality tested and approved by TÜV.

This beautiful chrome front fender comes with stainless steel mounting kit that fits for Z 900 RS and Z 900 RS Cafe. Installation plug & play. Scope of delivery: Chrome front fender, mounting kit stainless steel high-gloss polished

This chrome fender pays also tribute to the original Z 1 900 and looks just the same. The fender fits plug & play on all Z 900 RS models. Also the bracket for the turn signal holder is also included. The tail light and the matching longer tailpiece must be ordered separately here in our online store. We are the official importer of DOREMI-JAPAN. Scope of delivery: Fender chromed steel, mounting bracket for turn signals, mounting material

In the picture you see the color version matt black. The X-Bar handlebars impress with their enhanced stiffness compared to standard handlebars. This is the result of the construction with a 28.6 mm diameter in the clamping area and the use of a high-strength aluminum alloy. The handlebars spring less and offer more reserves under extreme stress. 28.6 mm in the clamping area / 22.2 mm at the ends length: 805 mm, height: 75 mm

Radiator cover made of stainless steel, mounting plug & play possible. Scope of delivery: radiator cover in stainless steel polished or black (black only possible for 2018-2020). ATTENTION! You can choose between the Euro 4 model (2018-2020) and the Euro 5 model (from 2021).

Exhaust system 4 in 4 steel chromed or black ceramic coated. The system fits plug & play on all Z 900 RS/Cafe models. We are the official importer of DOREMI-JAPAN who manufacture this exhaust system. It is processed in the highest quality in processing and chrome / ceramic coating. The system consists of 4 individual pipes, each equipped with a catalytic converter. Also there is a connection for the lambda probe. The system fits all Z 900 RS/Cafe models (from 2018). Info on the TÜV entry: We supply an exhaust emission certificate with the system, which was created specifically for the Z 900 RS (Euro 4). With this certificate, a TÜV-Eintrag is possible under certain circumstances. In our house a "TÜV Einzelabnahme" is no longer possible. Scope of delivery: Complete 4 in 4 exhaust system, incl. installed catalytic converters and lambda probe connection, left pillion footrest in original look (but with holder for exhaust, as on the right), exhaust emission certificate, design in chrome or black ceramic coated.Sound of the exhaust system here: https://www.youtube.com/watch?v=zHse8Xrx7JY

The spoke rim set is delivered completely ready for installation including wheel bearings and TÜV- certificate. Manufacturer RF-Biketech GmbH. Rim sizes (like the original): 3.5 x 17 front 5.5 x 17 rear These are aluminium rims with 40 stainless steel spokes and wheel hubs made of high-strength aluminium. The spoke rims offered here are delivered either black powdercoated or high gloss polished. Only the brake discs of the original wheels have to be mounted on the spoke rims. Original sprocket carriers and rear dampers stay the same. All wheel spacers etc. fit as well. No further changes necessary. The tires must be mounted with inner tube. Scope of delivery: Front wheel rim 3.5 x 17, spokes stainless steel, ready for installation, TÜV-certificate for Z 900 RS Rear wheel rim 5.5 x 17, spokes stainless steel, ready for installation, TÜV-certificate for Z 900 RS

Our custom made license plate holder for the Kawasaki Z 900 RS will be delivered completely ready for installation, including reflector and E-certified LED-license plate light, which is covered by the tail light. The license plate holder is available for the original turn signals or all common mini turn signals. The holder can also be installed with the original side reflectors, however they have to be placed a little bit differently (four little spacers are included in the delivery) Turn signals are installed at the very top, the license plate light is completely covered by the tail light so you can't see it directly. Therefore the holder can be installed directly below the tail light. Material: Stainless steel black powdercoated – fits on all Z 900 RS models. Fits best for license plates from 180mm to 240mm width. Scope of delivery: License plate holder with reflector and E-certified LED-light, 4x spacers The license plate holder is not TÜV-eintragungspflichtig. (Germany)

This brake fluid container is screwed directly on the brake pump.  Attention! A M5 thread has to be drilled in order to install the container. Items delivered: Brake fluid container black bicolor, adapter

This triple clamp kit made by RF-Biketech was built specifically for all Z 900 RS models. The kit can be installed plug & play. Brackets for ignition lock and equipment (speedometer etc.) are included in the upper triple clamp. Central clamp screw is also included. The original risers are also reused. Note: The engraving "Z 900 RS" (as seen on some pictures) is not included. Items delivered: Triple clamp kit, clamp screw, TÜV-documents

This spoke rim set for the Z 900 RS will be delivered completely ready for installation including wheel bearings and TÜV-certificate. Manufactured by RF-Biketech GmbH. Rim sizes (like the original): 3.5 x 17 front 5.5 x 17 rear These are stainless steel rims with 40 stainless steel spokes and wheel hubs made of high-strength aluminium. Because of the rear rim 6.25", rim sizes from 190/50 up to 210/50 can be installed. The spoke rims offered here are delivered either black powdercoated or high gloss polished. Only the brake discs of the original wheels have to be mounted on the spoke rims. Original sprocket carriers and rear dampers stay the same. All wheel spacers etc. fit as well. No further changes necessary. The tires must be mounted with inner tube. Scope of delivery: Front wheel rim 3.5 x 17, spokes stainless steel, ready for installation, TÜV-certificate for Z 900 RS Rear wheel rim 6.25 x 17, spokes stainless steel, ready for installation, TÜV-certificate for Z 900 RS

We offer to high gloss polish your Z 900 RS / Z 900 RS Cafe rims! You send us the rim by mail without tires, without brake discs and without wheel bearings and we polish / compress them to a high gloss finish. Even the rough castings in the inner bed will be perfectly smoothed and give the rims a great finish. ATTENTION: PRICE PER RIM! Additional info about the process: 1. You order the high gloss polishing here in our onlineshop. 2. You remove the rim and send it to us by mail without tires, without brake discs and without wheel bearings. 3. We high gloss polish the rim at our workshop. (Processing time approx. 1-2 weeks) 4. We send you the high gloss polished rim back by mail. We can also do the whole process ourselves – but then we need the vehicle on site. If you are interested, just give us a call or send us an e-mail. Cleaning and care: Your rims are protected by the polishing by a wax layer, so that the shine is permanently maintained with normal care. The rims can be cleaned normally with water and detergent. We still recommend to repolish the rim from time to time with an aluminum polish such as Never Dull or Luster Pad. TÜV information (for Germany): High gloss compacting does NOT reduce the strength of the rim, in fact the surface gets a higher strength. A good TÜV-engineer knows this and will also register the high gloss compacting for you. However, this entry will not work everywhere, so we guarantee the TÜV entry in our house, should there be any problems. High gloss polishing of the rim beds is not subject to registration.

This tail/brake light fits plug & play on the fender Prod-Nr. Z900RS08d and is delivered incl. mounting material and license plate holder. Attention! The tail light is only available in RED not in white as shown in some pictures. The chrome fender is NOT included here! It can be purchased seperately in our online store. Scope of delivery: Tail light red with EG-ABE incl. license plate holder black, mounting material

These milled from solid aluminum side covers for the radiator are supplied in polished or black semi-gloss powdercoated. Mounting plug & play possible. The side covers fit only from model 2018-2021 (model Euro 4). Scope of delivery: radiator side covers right and left, polished or black semi-gloss powdercoated

Headlight mask made of injection molded plastic with tinted windshield as well as special mounting kit for Z 900 RS models (all years of construction). This headlight mask and can be mounted within 20 minutes. No modifications need to be made to the vehicle itself. We provide an illustrated instruction manual for the installation. The headlight mask is delivered either unpainted in black or painted in different original Z 900 RS color options. If the desired color is not listed in the selection, please ask for it by e-mail. Scope of delivery: 1x lamp mask + windshield + associated screws 2x holding plate right and left 2x aluminum distance 15 x 32 mm 2x M6 x 45 allen + washers 2x M8 nuts with hexagon socket (special) 2x M8 flat nut 2x screw M8 x 20 hex 2x M8 x 45 hexagonal bolt 6x washer 8 mm 2x body washer 8 mm 2x M8 nut self-locking TÜV certificate for registration

This headlight brackets are custom made by us and replace the original bracket. The kit is mounted between the upper and lower fork crown. We kept the original adjustment possibility in mind so that adjustments of the headlight are still possible. Furthermore, our mini turn signals can be installed on the brackets. Items included: Black bracket kit with polished aluminium headlight brackets

These aluminum covers replace the plastic plugs in the upper frame area and also cover the open swing arm drill holes. They are simply pressed in and you're done! Scope of delivery: 4-piece frame cover set in polished or bicolor

We widen the original cast wheels of your motorcycle! The advantage is that you can then drive wider or even changed in diameter wheels / tires without having to make further changes to the bike. The wheel hubs remain unchanged, only the rim beds are changed. Of course you have to take into account the clearance wheel-chain, wheel-cardan, wheel-belt and the width of the swingarm. In most cases, the original rim widening for motorcycles is also the most cost-efficient way to realize wheel size changes. For widening, the original rim beds are turned on special lathes and then machine-welded to corresponding larger rim beds using the TIG welding process. The weld is no longer visible in the outer area of the rim beds and the rim looks like a "normal" rim. A strength certificate with identification is enclosed. Note: If you are unsure whether your rim can be widened, send us a picture by mail in advance! We will be happy to advise you. Here's why: Cast rims, which have a rim bed, into which no cast spokes run from the inner star, can generally be widened (that's most rims). However, there are also rims where the cast spokes merge into the rim bed. Here, it is usually difficult or even impossible to widen the wheel. Furthermore, the following applies: A rim can be widened by a maximum of 2.0" in the same diameter, e.g. 3.5" x 17" to a maximum of 5.5" x 17". Wider is also possible, but then the diameter of the rim must be increased by 1", e.g. 5.5" x 17" to 10.0" x 18". The wheels are blasted before processing and must be resurfaced after widening, which we of course also offer - just select the desired variant (coated, painted, polished). Our variants here in the store are always based on delivered 17" or 18" wheels. Other dimensions on request by mail. Please send or deliver wheels without attachments (brake discs, tires, sprocket carrier) by mail to us. The procedure: Place your order here in the store or send us an e-mail request Send the bike to us by mail (print out the order confirmation and put it in the package) to the address RF-Biketech GmbH, Mühlweg 10, 97720 Nüdlingen, Germany We widen the wheel as desired and treat the surface depending on the variant We send the widened wheel back to you Scope of delivery: Widened wheel (wheel bearings are not mounted but attached in the package) technical report with identification (Festigkeitsgutachten) for TÜV (Germany)

Here's our inhouse CNC-machined triple clamp set type 6 (Triple clamp sizes: top 40 mm, 2 clamping, below 60 mm, 3 clampings) made from high strength aluminum. Our triple clamp types from type 1 to type 6 are universal triple clamps/fork bridges, which are individually manufactured by us according to your wishes. For even more individual inquiries, please feel free to contact us by mail or phone, we are always happy to advise you and send you an offer by mail. We manufacture triple clamps for almost all standpipe distances, clamp diameters and offsets. Also we can consider original cockpits and ignition locks as well as after sale cockpits that are integrated in the triple clamp (f.e. motoscope pro). Fork covers: It is also possible to prepare the triple clamp for fork covers. Because we have to consider additional things here, please contact us via e-mail or phone. With a fork conversion the following criteria are always to be considered: Which brake system should be used in the fork conversion? (The original brake system or the brake system matching the fork? Both are possible, but the brake system matching the fork is recommended.) Which front wheel will be used? (The original front wheel or the wheel matching the fork? The wheel matching the fork is recommended.) Clamping diameter of the fork top and bottom Fork tube distance center - center Offset (center steering tube to center fork tube) Dimension of the steering tube (best with a sketch, which you send us in addition to the order via e-mail) Dimension of the steering stops (best with a sketch, which you send us in addition to the order via e-mail) If you are technically proficient enough to measure the desired triple clamp yourself, then please download the following form and send it to us filled out by e-mail with your order number from the store (if you have configured and ordered something here) to info@rf-biketech.de. You then select "Production via sketch" in the variants. We add the missing dimensions (f.e. the heights of the triple clamps etc.) ourselves when we manufacture the triple clamp. Download Form If you do not have the detailed measurements or are unsure, you can alternatively send the parts to us and we measure them ourselves. In that case, please select "Sample via mail" in the variants. For the sample package we need the following parts from you: lower original triple clamp of the bike lower triple clamp of the new fork upper original triple clamp (only if original steering lock and original cockpit are reinstalled) Of course you will get the parts back intact. They serve exclusively for the measurement. These measurements are so important, because during the production of your desired triple clamp the distance measurements can be taken into account (fork tube distance to each other), so that later the wheel and the brake system can be installed without further adapters. The steering stops or speedometer holders on the respective pictures here will of course look different on your triple clamp than on our sample pictures. Scope of delivery: Ready-to-install triple clamp set with pressed-in steering tube (stainless steel) Triple clamp sizes: top 40 mm, 2 clamping, below 60 mm, 3 clampings TÜV certificate (technical report)

3-part custom motorcycle wheel type 3 from our company, available for almost all motorcycles - whether single or double arm swingarm. (Wheels for single-sided swingarms are usually asymmetrical, i.e. the outer rim base is narrower than the inner rim base. This can only be determined after measuring the original rims) Important: We manufacture the rims ourselves, which means we can respond to detailed customer requests. So if you have a special design idea - we can make it a reality! We offer here in the store the most common variants of our rims, but are able to produce special designs of all kinds. So if you are interested, please send us an email or give us a call. We need the original wheels of your vehicle for the measurement. Please remove brake discs and tires, we also don't need the sprocket carrier for the measurement. Simply send them well packed by mail to RF-Biketech GmbH, Mühlweg 10, 97720 Nuedlingen, Germany. Once we have taken the measurements, we will return the wheels to you intact by mail. The rims are made of high-strength aluminum using CNC technology here inhouse. We mill the inner part of the rim completely ourselves, the rim beds are delivered to us. The inner part and the rim beds are then screwed together (VA screws) and glued. The tires are mounted tubeless. The hub adapters for the rims are included in the price. Sprocket carrier of the original rims is further used. Otherwise the wheels are plug & play ready to install, no new wheel spacers or other modifications necessary (of course only if original sizes are chosen). If you choose wider wheels, rear swingarm or triple clamps have to be changed as well - we offer wide swingarms as well as our own triple clamps here in the store. Just give us a call or write an email if you have any questions, we'll be happy to advise you! Surface info: Rims can be delivered high gloss polished, bicolor (rims are coated in color and the contours of the inner part then milled again, so that these edges and pockets appear again in aluminum silver) or also in RAL powder coated. We offer here in the store only black-matte and black-glossy, other colors quite simply ask by mail and we send you an offer. The rims are delivered ready to install including wheel bearings. Sizes from 3.5" x 17 (18) to 12.5" x 18. Other sizes available on request! Scope of delivery: Motorcycle rim, ready for installation, incl. wheel bearings TÜV documents: technical drawing, material specification - here a TÜV-Einzelabnahme is required (can be carried out at a competent TÜV office on site, alternatively at our premises by appointment)

3-part custom motorcycle wheel type 4 from our company, available for almost all motorcycles - whether single or double arm swingarm. (Wheels for single-sided swingarms are usually asymmetrical, i.e. the outer rim base is narrower than the inner rim base. This can only be determined after measuring the original rims) Important: We manufacture the rims ourselves, which means we can respond to detailed customer requests. So if you have a special design idea - we can make it a reality! We offer here in the store the most common variants of our rims, but are able to produce special designs of all kinds. So if you are interested, please send us an email or give us a call. We need the original wheels of your vehicle for the measurement. Please remove brake discs and tires, we also don't need the sprocket carrier for the measurement. Simply send them well packed by mail to RF-Biketech GmbH, Mühlweg 10, 97720 Nuedlingen, Germany. Once we have taken the measurements, we will return the wheels to you intact by mail. The rims are made of high-strength aluminum using CNC technology here inhouse. We mill the inner part of the rim completely ourselves, the rim beds are delivered to us. The inner part and the rim beds are then screwed together (VA screws) and glued. The tires are mounted tubeless. The hub adapters for the rims are included in the price. Sprocket carrier of the original rims is further used. Otherwise the wheels are plug & play ready to install, no new wheel spacers or other modifications necessary (of course only if original sizes are chosen). If you choose wider wheels, rear swingarm or triple clamps have to be changed as well - we offer wide swingarms as well as our own triple clamps here in the store. Just give us a call or write an email if you have any questions, we'll be happy to advise you! Surface info: Rims can be delivered high gloss polished, bicolor (rims are coated in color and the contours of the inner part then milled again, so that these edges and pockets appear again in aluminum silver) or also in RAL powder coated. We offer here in the store only black-matte and black-glossy, other colors quite simply ask by mail and we send you an offer. The rims are delivered ready to install including wheel bearings. Sizes from 3.5" x 17 (18) to 12.5" x 18. Other sizes available on request! Scope of delivery: Motorcycle rim, ready for installation, incl. wheel bearings TÜV documents: technical drawing, material specification - here a TÜV-Einzelabnahme is required (can be carried out at a competent TÜV office on site, alternatively at our premises by appointment)

3-part custom motorcycle wheel type 6 from our company, available for almost all motorcycles - whether single or double arm swingarm. (Wheels for single-sided swingarms are usually asymmetrical, i.e. the outer rim base is narrower than the inner rim base. This can only be determined after measuring the original rims) Important: We manufacture the rims ourselves, which means we can respond to detailed customer requests. So if you have a special design idea - we can make it a reality! We offer here in the store the most common variants of our rims, but are able to produce special designs of all kinds. So if you are interested, please send us an email or give us a call. We need the original wheels of your vehicle for the measurement. Please remove brake discs and tires, we also don't need the sprocket carrier for the measurement. Simply send them well packed by mail to RF-Biketech GmbH, Mühlweg 10, 97720 Nuedlingen, Germany. Once we have taken the measurements, we will return the wheels to you intact by mail. The rims are made of high-strength aluminum using CNC technology here inhouse. We mill the inner part of the rim completely ourselves, the rim beds are delivered to us. The inner part and the rim beds are then screwed together (VA screws) and glued. The tires are mounted tubeless. The hub adapters for the rims are included in the price. Sprocket carrier of the original rims is further used. Otherwise the wheels are plug & play ready to install, no new wheel spacers or other modifications necessary (of course only if original sizes are chosen). If you choose wider wheels, rear swingarm or triple clamps have to be changed as well - we offer wide swingarms as well as our own triple clamps here in the store. Just give us a call or write an email if you have any questions, we'll be happy to advise you! Surface info: Rims can be delivered high gloss polished, bicolor (rims are coated in color and the contours of the inner part then milled again, so that these edges and pockets appear again in aluminum silver) or also in RAL powder coated. We offer here in the store only black-matte and black-glossy, other colors quite simply ask by mail and we send you an offer. The rims are delivered ready to install including wheel bearings. Sizes from 3.5" x 17 (18) to 12.5" x 18. Other sizes available on request! Scope of delivery: Motorcycle rim, ready for installation, incl. wheel bearings TÜV documents: technical drawing, material specification - here a TÜV-Einzelabnahme is required (can be carried out at a competent TÜV office on site, alternatively at our premises by appointment)