K&N single air filters oval

Set of intake rubbers for RS 34 and RS 36 Mikuni flat slide carburetors, suitable for all Z models from Z 1 900 to GPZ 1100. Scope of delivery: Set of intake rubbers, 4 pieces

Mikuni RS 36 carburetor for Zephyr 1100 or for Z 900, Z 1000, Z 1000 MK2, Z1R, GPZ 1100 B1, GPZ 1100 B2 and GPZ 1100 UT – please choose your vehicle in the variants above! This carburetor can be installed in conjunction with the original air filter box and the original intake rubbers, only the original throttle cable must be slightly modified. This RS 34 Mikuni flat slide carburetor can be installed in conjunction with the original air filter box and the original intake rubbers, only the original throttle cable must be slightly modified. You can expect more power and higher torque due to the optimal tunability. For this purpose, the K&N exchange filter is highly recommended. The RS carburetor kits from Mikuni are available for a variety of different motorcycles. These carburetors have proven themselves very well over the years, both on racing and street bikes. The advantages of these carburetors over stock carburetors are more spontaneous throttle response and higher power output. The more spontaneous throttle response results from the throttle slide being actuated directly by the throttle cable, in contrast to the constant-pressure carburetors, which are fitted exclusively as original equipment, where the throttle slide is lifted by a membrane with a delay. The higher power output is due on the one hand to the larger cross-section and on the other to the very good flow conditions in the RS carburetor. Important components such as the main jet, needle jet and jet needle can be replaced or modified in just a few minutes without having to remove the carburetor. The infinitely adjustable accelerator pump allows individual adjustment for different driving styles. Scope of delivery Complete carburetor Mikuni RS 36, ready for installation

This RS 34 Mikuni flat slide carburetor can be installed in conjunction with the original air filter box and the original intake rubbers, only the original throttle cable must be slightly modified. You can expect more power and higher torque due to the optimal tunability. For this purpose, the K&N exchange filter is highly recommended. The RS carburetor kits from Mikuni are available for a variety of different motorcycles. These carburetors have proven themselves very well over the years, both on racing and street bikes. The advantages of these carburetors over stock carburetors are more spontaneous throttle response and higher power output. The more spontaneous throttle response results from the throttle slide being actuated directly by the throttle cable, in contrast to the constant-pressure carburetors, which are fitted exclusively as original equipment, where the throttle slide is lifted by a membrane with a delay. The higher power output is due on the one hand to the larger cross-section and on the other to the very good flow conditions in the RS carburetor. Important components such as the main jet, needle jet and jet needle can be replaced or modified in just a few minutes without having to remove the carburetor. The infinitely adjustable accelerator pump allows individual adjustment for different driving styles. Scope of delivery Complete carburetor Mikuni RS 34, ready for installation