motogadget motoscope pro
The motoscope pro impresses with its ultra-flat housing design. 734 LEDs, controlled by a 16bit Risc processor, form the almost fully self-illuminating display matrix. It ensures optimal readability - even in direct sunlight. Automatic brightness adjustment is a matter of course. An analog LED band with drag pointer function displays the speed in a freely scalable manner. The main and secondary display can be configured by the user. Another display area shows the engaged gear. Four indicator lights are already integrated and can be used for many more input signals with the help of the display. The Breakout Box A or B is additionally required for the connection wiring of the indicator lights and/or the measuring inputs.
The motoscope pro has a complete CAN bus interface and is therefore prepared for many future future developments of Plug 'n Ride solutions.
The aluminum housing is milled from solid, anodized and can be easily mounted by two threaded bushings on the back. The instrument has an ABE and does not have to be registered.
Please order the breakout box for connecting indicator lights separately. For BMW R9T no breakout box is needed.
Technical data:
- Length/width/depth: 109 mm/ 47 mm/ 11 mm
- Weight with cable: approx. 100 g
- Mounting: 2 x M3 threaded bush
- Current consumption in operation: approx. 200 mA (load-dependent)
- Current consumption in idle state: 0.4 mA
- Operating voltage: 9 V - 15 V
- Operating temperature: -20°... +80°C
- Tachometer (LED band): 0 - 6, 8, 10, 12, 14, 16, 18 krpm (adjustable)
- Speedometer: 0 - 350 km/h o. mph
- Trip meter A: up to 999.9 km or mi
- Total kilometers (adjustable): up to 250000 km or mi
- Operating hours counter/service: 0 - 9999.5 h
- Clock: 23:59 h/min
- Travel time display: 0 - 99:59:59 h/min/s
- Tachometer (on LCD): 0 - 20000 rpm
- adjustable speed warning (shift flash): 0 - 20000 rpm
- On-board voltage indicator: 9 - 18 V
- Undervoltage warning: Warning when below approx. 11V
- Time measurement: 0 - 100 km/h o. 0 - 60 mph 0.00 - 30.59 sec.
- instantaneous acceleration: +/- 0.00 - 1.50 G
- Average speed: 0 - 350 km/h o. mph
- Maximum speed: 0 - 350 km/h o. mph
- Maximum speed: 0 - 20000 rpm
- max. positive acceleration: +1.50 G
- max. negative acceleration: - 1.50 G
- Gear indicator N, gear 1 - 6
- green control LED (with breakout box A/B): idle (N)
- green control LED (with breakout box A/B): turn signal left, right
- blue control LED (with breakout box A/B): high beam
- red warning LED (with breakout box A/B): various warning functions
- Gasoline/reserve (with breakout box A/B): 0 - 100% with low warning
- Air temperature* (with breakout box B): -20/ - 80 °C / -4 - 176 °F with High-/Low-warning
- Water temperature* (with breakout box B): 40 - 120 °C / 104 - 248 °F with high/low warning
- Oil temperature* (with breakout box B): 40 - 150 °C / 104 - 302 °F with High-/Low warning
- Oil pressure* (with breakout box B): 0.5 - 8 bar / 0 - 116 psi with high/low warning
Scope of delivery:
- Instrument with approx. 75 cm connection cable
- Mini pushbutton
- flying fuses
- 6 Cable end connectors
- Speedometer sensor (M5 x 0.5 fine thread, stainless steel, IP 68) with 150 cm connection cable
- 2 strong neodymium mini magnets
- 2 M3 mounting screws with washer
- QR code for mounting and operating instructions
Please note that temperature and pressure sensors must be ordered separately.
Breakout Box
