Power LED turn signal in a black aluminum housing with tinted glass. With this innovative lighting technology, 2 very bright SMD LEDs are installed in the centre, enabling an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). Thanks to the new LED chip embedding for high-power LEDs, a very high luminance can be achieved with currently the best possible efficiency and service life. This also allows higher light values to be achieved than with conventional LEDs. In the right direction – with the innovative turn signal series from HIGHSIDER. Don’t just show where you’re going, show who you are. This is trend-setting design at its best. Dimensions: A Diameter: 22 mmB Width: 34 mmD Depth: 40 mm Thread bolt M8 x 17 mm Connections: Black wire = ground (-)Yellow wire = turn signal (+) Scope of supply: 1 pair Note: E-approved for front and rear.

Power LED turn signal in a chrome or black aluminium housing with tinted glass. E-approved for front and rear. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the reference to the past. The slender, round forms support the classical associations. In this innovative lighting technology, 2 very bright SMD LEDs are installed in the center, which allow an extremely small design. The outer ring, on the other hand, consists of the new COB technology (Chip On Board). Thanks to the new LED chip embedding for high-power LEDs, a very high luminance can be achieved with currently the best possible efficiency and service life. This also allows higher light values to be achieved than with conventional LEDs. In the right direction – with the innovative turn signal series from HIGHSIDER. Don’t just show where you’re going, show who you are. This is trend-setting design at its finest. Dimensions A Diameter: 22 mmB Width: 39 mmC Depth: 21.5 mmStem length: 16 mm M8 x 1.25 threaded bolt Connections: Black cable = ground (-)Yellow cable = turn signal (+) Scope of delivery: 1 pair

Power LED in an aluminum housing, for front + rear E-approved, available in black und chrome. Dimensions: A diameter: approx. 45 mmB width: approx. 70 mmD depth: approx. 70 mm Threaded bolt: M10 x 1.5 mm Scope of supply: 1 pair

Power-LED turn signal in a black metal housing, with short handle and E-approved. Dimensions: A: 34 mmB: approx. 49 mmC: approx. 23 mmD: 20 mm Threaded bolt M8 x 1.25 mm Scope of delivery: 1 Pair

Highsider Rocket Bullet LED turn signal with aluminium housing and tinted glass. The tapered version to the HIGHSIDER ROCKET CLASSIC – for front and rear E-approved. Inspired by organic shapes, HIGHSIDER product development has designed a completely new housing shape without losing sight of the reference to the past. The soft, round shape supports the classical associations evoked in the observer. In the center 6 very bright SMD are installed. The outer ring consists of COBs (Chip On Board). Thanks to the new LED chip embedding for high-power LEDs, a very high luminance can be achieved with currently the best possible efficiency and service life. This also allows higher light values to be achieved than with conventional LEDs. In the right direction – with the innovative turn signal series from HIGHSIDER. Don’t just show where you’re going, show who you are. This is trend-setting design at its best. Dimensions: Diameter: 45 mmWidth: 65 mmDepth: 64 mmPole length: 24 mm Mounting bolt with M8 thread, length: 25 mm. Connections: Black cable = ground (-)Yellow cable = turn signal (+) Scope of delivery: 1 pair

The mo.blaze disc is the flashing signal light of the latest generation. The characteristic feature of the LED turn signal is the transparent illuminated disc on a compact aluminum base, which harmoniously closes with the handlebar end grip. Our now third turn signal, which uses the new TranzLight technology (TLT, patent pending). This progressive development approach is not limited to simple miniaturization of turn signal housings, but designs the light directly via a crystal-like plastic body. Only precise optical CAD calculations and state-of-the-art manufacturing processes make this novel design and its function possible. The light flux required for the TranzLight principle is generated by the motogadget's intensiLED® process and consists of three important components three important components: Selected high power LEDs with maximum efficiency and a total power of 7W with a lifetime of more than 50,000 hrs. An IC controlled constant current regulation clocked at 330kHz. A special collimator optics, which couples the light of the LED precisely into the plastic body The discreet aluminum housing is only used for the stable mounting of the glass body and the integration of control electronics and high-end LEDs. Of course, the housing is CNC-manufactured, black anodized or highly polished and finely inscribed by laser. The handlebar end turn signal builds very flat and appears through the transparent disc neutral and inconspicuous. Thus, it fits many styles and the most diverse motorcycles. The flasher can be operated like any other LED flasher with load resistors or all our load-independent flasher relays (mo.flash, mo.wave, mo.stop, mo.relay+). The handlebar end turn signal mo.blaze disc presented here has an E mark and is approved as a front turn signal according to ECE. Technical data: Diameter: 35 mm Total length over all: 68 mm Partial length outside the handlebar: 20 mm Partial length inside the handlebar: 48 mm Cable length: approx. 100 cm Scope of delivery: A handlebar end turn signal mo.blaze disc left or right Clamp for steel and aluminum handlebars (22 mm and 1 inch handlebars) with an inner diameter of 14 mm to 21 mm Connection cable with approx. 100 cm. QR code for mounting and operating instructions For use as a pair, please order one left and one right turn signal.

The mo.Blaze PIN from motogadget sets new standards for mounted turn signals with power LED technology. Its tiny dimensions and reduced design make it almost disappear on the vehicle. As soon as it lights up, it is extremely bright due to the IntensiLED Technology and definitely not to be overlooked. In addition, the patented TranzLight Technology (TLT) with a large beam angle ensures the best visibility and safety. The mounted turn signal has an ECE approval as a front and rear direction blinker. The aluminum housing is CNC turned and available in black anodized or mirror polished finish. Advantages at a glance: absolutely unique, new design and functional principle (TranzLight Technology)very filigree appearance due to transparent glass body and very small, reduced aluminum basehighest luminosity due to most modern high-power LED technology (IntensiLED)electronic voltage conditioning and safe protection electronicsvery bright light in direction of emission, well visible light to almost all sides Dimensions: Total length with thread: 38,5mmlength without mounting thread: 19,5mmlargest diameter: 16 mmCable length: approx. 100 cm Weight: approx. 12 g Mounting: M8 threaded bolt Power consumption: approx. 3 Watt The flasher can be operated like any common LED flasher with load resistors or all our load-independent flasher relays (mo.Flash, mo.Wave, mo.Stop, mo.Relay+). Scope of delivery: Single mounted turn signal mo.blaze pin with thread M8, nut M8, connection cable of approx. 100 cm length, installation instructions.

The latest lighting technology with powerful high power LED and a tuned lens. Robust metal housing in black with tinted glass, E-tested. Dimensions (see picture): A Width 1: 50 mmB Width 2: 62.5 mmC Height: 16 mmD Depth: 14 mm Threaded bolt: M8 Connections: Yellow cable = turn signal (+)Black cable = ground (-) Scope of delivery: 1 pair

SHIN YO LED running light turn signal run. The modern indicator with built-in running light system and lightweight plastic housing (glass, tinted) has the latest lighting technology. When flashing, the individual LEDs light up one after the other from the inside to the outside and create a wiping effect as with current car models. The trendy running light is a real eye-catcher with which your vehicle stands out in road traffic and thus increases traffic safety. Even with the tinted glass, the indicator is running light in road traffic.  The indicator is E-tested for front and rear.  Dimensions: Width: 70 mm Height: 20 mmDepth: 23 mmWidth (with rubber handle 12 mm): 82 mm Threaded bolt: M 8  Connectors:  yellow cable = indicator (+)black cable = ground (-)  Thread M8, rubber mounted handle, so little vibrations and therefore long life of the bulb.  Box contents: 1 pair