Puristically shaped headlight with metal housing for lateral mounting. The simple design is ideal for classics, roadsters and customized bikes. The chrome-plated reflector with clear glass also has a high beam, low beam, parking and daytime running light function. The daytime running light and position light are mounted in a central strip, so that a very beautiful optical image is created – the dipped beam lights up above the strip, the main beam light correspondingly below. The reflector emits an asymmetrical luminous flux – only approved for right-hand traffic -, E-examined. Our highlights give your bike an unmistakable style! The unusual design and the perfect technology of the HIGHSIDER headlight series make it a highlight in any case! Dimensions: Housing diameter (hole spacing at the same time): 190 mmHeating insert diameter: 178 mmHousing depth: 140 mmDistance between mounting holes – Housing front edge: approx. 47 mmDistance between mounting holes – Housing end: approx. 80 mmDiameter Cable guide: 35 mm Fixing: lateral with M8 threaded bolts Connections: Black cable = ground (-)Blue cable = low beam (+), power consumption at 12V: 1.8A, 22WYellow cable = high beam (+), power consumption at12V: 1,3A, 13WBlack cable = ground (-) TFL: Black cable = ground (-)Red cable = daytime running light (+), power consumption at 12V: 1,2A, 14WWhite cable = position light (+), power consumption at 12V: 0,2A, 2,4W Scope of supply: 1 piece incl. 3 pin connector Notes: Use asymmetrical, approved for right-hand traffic only The enclosed 3-pole standard plug must be installed by the customer after reflector installation View of plug contacts: Driving light (yellow) = right-handDipped beam (blue) = topground (black) = left-handDescription from Highsider.

The installed LED daytime running light with position light in TYPE 8 is the perfect way to improve visibility during the day. The correct daytime running light switching on the vehicle is given without additional control boxes or switches, fulfils the regulations and simplifies the installation. Thanks to modern LED lighting technology, huge advances have been made in the spotlight area. An LED bend lighting headlamp for retrofitting to motorcycles heralds the next evolutionary stage in vehicle lighting. The HIGHSIDER LED headlight with cornering light, offers clear advantages over a conventional headlight. The static cornering light activates an additional light when the motorcycle is tilted in a bend. Due to the improved illumination you can see more of the curve and what is behind it. The driver can better adapt to the conditions and situations and is safer on the road. Two ellipsoid lenses in combination with powerful LEDs turn night into day and thus combine a strong plus in safety with a polarizing unique look. The headlamp is protected by a high quality metal housing and is available in black with tinted glass or in chrome with clear glass. Of course, the HIGHSIDER LED headlight with daytime running light, position light and cornering light is E-approved. To switch from daytime running light to low beam: Press the high beam/light flasher button briefly (approx. 1 second) and release the button as soon as the low beam is active. Then the low beam is permanently active. Stunning – give your bike your unmistakable style! The unusual design and perfect technology of the HIGHSIDER headlight series will definitely make you a highlight! Dimensions: Diameter: 190 mmDepth: 140 mmDistance mounting holes – housing end: approx. 80 mmHeadlight insert Ø: 178 mm Fixing: Side M8 x 1.25 Connections: Power input: 3 pin connectorRed cable = low beam (+)White cable = high beam (+)Black cable = ground (-)Separate cable (round connector):Red cable = LED position light (+) Note: The resistor included in the scope of delivery is designed for the R nineT (2014), but may also be suitable for other vehicle models. Through this resistor the parking light error message is prevented.Description from Highsider.

Innovative power LED headlight with parking light function and clear glass. The oval metal housing, has a chrome-plated, asymmetrical – approved only for right-hand traffic – reflector, E-approved. Our highlights – give your bike a distinctive style! The fancy design and the perfect technology of the HIGHSIDER headlight series make it a highlight in any case! Dimensions headlight: Housing diameter: 200 mmDiameter headlight insert: 178 mmHousing depth: 160 mmDistance of mounting holes (center – center): 170 mmDistance mounting hole (center) to end of housing: approx. 90 mmFixing: on the side with M8 threaded bolt Connections: White cable = low beam (+)Blue cable = high beam (+)Green cable = ground (-)Grey extra cable = LED position light (+)Black extra cable = ground (-) Scope of delivery: 1 piece, including 3-pin mating connector Note: Insert asymmetrical, only approved for right-hand trafficDescription from Highsider.

The futuristic LED main headlight with its horizontal parking light strip in the middle has a very flat housing made of metal. The flat housing with its cooling fins on the back not only looks great, but also simplifies the installation on motorcycles where in the headlight area is not so much space for installation. The top and bottom air ducts look dynamic and bring cooling air to the cooling fins. To be even more flexible in mounting, the headlight offers mounting options on the side and on the back. Laterally, there is a M8 thread on the left and right. On the back are additionally six M6 threads, two each at the top, middle and bottom.Dimensions: Case diameter: 170 mmDepth: 84 mmDistance mounting hole (center) to end of housing: approx. 48 mmConnectors: 3-Pin combi plugyellow = low beam (+)blue = high beam (+)black = ground (-)Additional cables: white = position light (+)black = ground (-)Scope of delivery:LED-headlight THUNDERBOLT with parking light, black

SHIN YO 7 inch LTD headlight. The popular main headlight in the classic LTD style makes it the perfect part for all conversion projects. The tested headlight is also robust and easy to install. Symmetrical H4 insertWith prism reflectorClear glassParking lightMounting point: lateralE-approved Dimensions: Diameter: 200 mmDiameter headlight insert: 178 mmDepth: 120 mmThread of the mounting holes: M8 x 1.25Distance of mounting holes: 200 mmDistance of mounting holes to rear side of housing: 70 mm Note: Without H4 bulb

SHIN YO LED main headlight TWIN with low beam and high beam. The LED headlight set in a sturdy metal housing for side mounting gives the bike that special look. The 4 inch low beam and high beam headlight is universally usable for all motorcycle conversions. Available in chrome as well as black version, E-approved. It is necessary to connect a parking light separately, as this is not integrated in any of the headlights. Dimensions: Height: 107 mmWidth: 215 mmDepth: 130 mmDepth from thread: 60 mmDiameter inserts: 91 mm eachCable length: approx. 600 mm Housing:Material: metalMounting: lateral Connections: White = low beam (+)Blue = high beam (+)Green = ground (-)With wiring harness and 3-pin connector for H4 Note: Without parking light, please order separately if necessary.

SHIN YO universal headlight OVAL in V-Rod style with parking light, black plastic housing, 12V H9+H11, side mounting, E-approved. Dimensions: Height: 180 mmWidth: 160 mmDepth: 140 mm Illuminant: High beam 12V H9+Low beam H11 55W Mounting: M6 thread Assignment 3-way standard connector: black = ground (-)blue = high beam (+)yellow = low beam (+)Extra 3.5mm round plug green = parking light (+)